Cable locator and acoustic fault detector Success ATG-435.15E
Cable locator and acoustic fault detector Success ATG-435.15E
Cable locator and acoustic fault detector Success ATG-435.15E
The set includes the digital multifunctional receiver АР-027M and the portable transmitter with output power up to 20 W.
Key features
- Cable location using a transmitter with output power up to 20 W.
- Visualization of the acoustic signal spectrum and adjustable frequency filter bandwidth for accurate cable fault detection.
LCDscreen
Utilitydetection
depth
Tracingdistance
Features
Based on receiver AP-027M, EMD-247 sensor, acoustic sensor AD-227, tracing transmitter AG-105.
- High precision location of underground utilities up to 6 m.
- Acoustic cable fault detection.
- Distance of tracing is 3 km from the place of transmitter connection.
- Detection of insulation deterioration on cables by non-contact methods: sharp decreasing of the signal level, by using the sensor DODK (extra tool), the phase "double-frequency" method "Δφ" and the amplitude of "double-frequency" the method of "ΔA".
- Detection of insulation deterioration on cables by contact method: Sensor DKI (extra tool).
Brief description
- Receiver frequencies: 50(60) Hz / 100(120) Hz / 512 Hz / 1024 Hz / 8192 Hz / 33 kHz.
- Passive receiver frequencies: power cable detection, BB mode.
- Storage of 31 signal level with a graph displayed.
- Visual indication of the signal on the display: scale, graph and spectrum.
- Graphic visualization (moving chart) of sequence of measurements, max and min signal levels.
- Sound indication.
- Choice of bandwidth.
- Two-segment indication of frequency spectrum (and “filtered”) signal.
- Light weight.
- Comfortable to wear for long terms.
- LCD display.
- Transmitter frequencies: 0.5 / 1.0 / 8.2 / 33 kHz.
- Transmitter 20 W.
- Distance of tracing is 3 km from the place of transmitter connection.
- Warranty 1 year.
Application
- Cable fault location by electromagnetic and acoustic methods (with high-voltage pulse transmitter, which is not included into the set).
- Detection of insulation deterioration on cables by contact and non-contact methods.
- Detection of cables up to 6 m depth.
- Detection of metal pipelines up to 6 m depth.
- Survey the ground before the ground works.
- "Broadband" mode.
- Distance of tracing from the place of transmitter connection is up to 3 km.
- Indirect measurement of the depth.
Specifications receiver AP-027M
| Parameter | Tracing |
|---|---|
| Type of accepted signal | Continious / pulse |
| Frequencies of the receiver’s filter | Central frequency of quasi- resonant filter 50 to 60 Hz,100 to 450 Hz through 50 Hz, 120 to 540 Hz through 60 Hz, 512 Hz / 1024 Hz / 8192 Hz / 33kHz |
| "Broadband" (operating mode) | 0,05 to 8,6 kHz |
| Gain factor | 100 dB |
| Visual indication | Liquid-crystal display-symbols and meaning of the chosen modes and parameters: - animated (moving) scale of the output signal level; - digital value and animated (moving) scale of the output signal level; - graphic (moving diagram) of the output signal level - frequency content of the output signal level; - digital and graphic display of output signal levels kept in the "memory" |
| Sound indication | - headphones natural broadband or filtered signal; - headphones-synthesized sound, frequency modulation; - built-in emitter - synthesized sound, frequency modulation |
| Supply | voltage 4 to 7 V. - alkaline batteries АА type 1,5 V (4 pcs.) |
| Time of continuous operation not less than | 20 hours |
| Ambient temperature | -20°С to +50°С |
| Ingress protection rating | IP54 |
| Receiver AP-027M dimensions | 220x102x42 mm |
| Weight of the electronic unit | 0,46 kg |
Specifications transmitter AG-105
| Parameter | Value |
|---|---|
| The frequencies of the continuous «Co» or pulse «Pu» signal, Hz ± 0,1% - «kHz» | |
| Load «clips» or «clamp» | 512 - «0.5» / 1024 - «1.0» / 8192 - «8.2» / 32768 - «33» |
| «Antenna» modes | 8192 - «8.2» / 32768 - «33» |
| Operating modes | |
| «Antenna» modes | Internal transmitting inductor «In» |
| External induction transmitting antenna «An» | |
| «Modulation» modes (special form signal) | - Pulse «Pu» (short-term transmissions of the sine signals); - Transmission duration 0,12 sec.; - Transmissions repetition frequency 1 Hz |
| - Dual-frequency «2F» (simultaneous frequency generation 1024 Hz, 8192 Hz); - Amplitudes ratio 4/1 (respectively) |
|
| Output parameters under power supply voltage 12…15 V | |
| Output current, А | |
| Restricted by the program under manual increment, ≥ | 5 - at frequency 512 Hz «0.5» / 1024 Hz «1.0» / 8192 Hz «8.2» / «2F» |
| 3 - at frequency 32768 Hz «33» | |
| Set by the program for automatic adjustment with the external load of «clips» or «clamp», ≥ | 0,2 - at frequency 512 Hz «0.5» / 1024 Hz «1.0» / «2F» |
| 0,1 - at frequency 8192 Hz «8.2» / 32768 Hz «33» | |
| Maximum output voltage, V | |
| Depending on «modulation», ≥ | 32 - in the dual-frequency modulation mode «2F» |
| 40 - in other modes | |
| Maximum output power, W | |
| Restricted by the program, ≥ | 20 - in the continuous «Co» and pulse «Pu» modes at frequencies 512 Hz «0.5» / 1024 Hz «1.0» / 8192 Hz «8.2» at load resistance up to 80 Ω In dual-frequency mode «2F» at load resistance up to 50 Ω |
| 6 - at frequency 32768 Hz «33» at load resistance up to 260 Ω | |
| Power supply sources | |
| Operating range of the supply voltages | Minimally acceptable voltage for oscillation start-up - 7 V |
| Maximum allowed voltage for operation - 15 V | |
| Automatic shutdown voltage in the “oscillation” mode < 4,2 V | |
| Battery set | 8 «alkaline» cells 1,5 V «type С» (recommended – «Duracell ® ULTRA») |
| External power supply sources (optional) | - Battery «12 V» (e.g. automotive); - Output voltage 11…14 V, maximum current not less than 4 А |
| - Mains power supply adapter АG114М.02.020 (extra accessory based on GS60A15-P1J «MEAN WELL»); - Output voltage 15 V, power 60 W |
|
| Operating time («life cycle») | While in operation of the battery set «type Сх8» is defined by the quality (capacity and «load capability») of the applied alkaline cells and can be equal to from 4 to 6 hours in the «Co» и «2F» modes or from 20 to 30 hours in the «Pu» mode at initial output voltage 7 W in «continuous» modes «Co» / «2F» or at initial output voltage 15 W in pulse modulation mode «Pu» |
| Under the external power supply is fully conditioned by this external energy source characteristics therefore under mains supply operating time is unlimited | |
Standard set
| № | Name |
|---|---|
| 1 | Receiver AP-027M |
| 2 | Acoustic sensor AD-227 |
| 3 | Carrying rod for AD-227 |
| 4 | Extension carrying rod for AD-227 |
| 5 | Contact rods for AD-227 |
| 6 | Magnet for AD-227 |
| 7 | Electromagnetic sensor EMD-247 |
| 8 | Transmitter АG-105 |
| 9 | Headphones |
| 10 | Grounding rod |
| 11 | Cables and accessories |
| 12 | Holder for AP-027 |
| 13 | Contact magnetic |
| 14 | EMD carrying bag |
| 15 | Set carrying bag |
| 16 | Manual and passport |
Video
Transmitter АG-105
Portable transmitter demonstration & review.
Download full product catalogue
Download