Cable locator Success CBI-436N

Digital cable locator, based on our receiver AP-027 and EMD-247 sensor.

Features:

AP-027 digital location receiver
Energized cable detection underground up to 6 m depth
Visual indication of the signal on the display: scale, graphic and spectrum

Request price

Request demo

Overview

Brief description:

Storage of 31 signal level with a graph displayed
Visual indication of the signal on the display: scale, graphic and spectrum
Graphic visualization (moving chart) of sequence of measurements, max and min signal levels
Sound indication: natural and synthesized sound
Broadband mode: 0,05 to 8,6 kHz
Min and max method of cable tracing
Light weight
Comfortable to wear for long terms
LCD display
Warranty: 1 year

Application:

Detection of energized cables underground up to 6 m depth
Measurement of the depth by indirect electromagnetic method

Specifications

Receiver AP-027 Technical specifications

Parameter	Tracing
Type of accepted signal	Continious /pulse
Frequencies of the receiver’s filter	Central frequency of quasi- resonant filter 50 to 60 Hz,100 to 450 Hz through 50 Hz, 120 to 540 Hz through 60 Hz, 512 Hz / 1024 Hz / 8192 Hz/ 33kHz
«Broadband», (operating mode)	0,05 to 8,6 kHz
Gain factor	100 dB
Visual indication	Liquid-crystal display-symbols and meaning of the chosen modes and parameters. animated (moving) scale of the output signal level digital value and animated (moving) scale of the output signal level graphic (moving diagram) of the output signal level - frequency content of the output signal level digital and graphic display of output signal levels kept in the "memory"
Sound indication	Headphones natural broadband or filtered signal
	Headphones-synthesized sound. Frequency modulation
	Built-in emitter - synthesized sound. Frequency modulation
Supply	Voltage 4 to 7 V. - alkaline batteries АА type 1,5 V (4 pcs.).
Time of continuous operation not less than	20 hours
Ambient temperature	-20°С to +50°С
Ingress protection rating	IP54
Receiver AP-027 dimensions	220 × 102 × 42 (mm)
Weight of the electronic unit	0,46 kg

Standard set

Standard set:

Receiver АP-027
Electromagnetic sensor EMD- 247
Headphones
Holder for АР -027
Screwdriver
Set carrying bag
EMD carrying bag
Operation manual
Technical passport

Accessories

Sensor DKI-117

DKI sensor is used with cable locating receiver for location of insulation damage in power cables, gas and heat pipes.

Sensor DODK-117

Searching of cable faults at shorting of its armoring to the ground. Searching of outer insulation defects of metal pipelines (water, gas) at trenchless laying.

Portable electromagnetic sensor MED-127

MED-127 is used for the selection of the cable from a bunch, for location of internal wiring and cable fault location.

AA accumulators with charger

Set of type AA rechargeable accumulators and chargers for AP-027 and AP-014.

Download

Download

Operation manual
1 MB

Datasheet
2.9 MB

Сertificate of Сonformity
3.6 MB

If you want to receive price quotation for Cable locator Success CBI-436N, Contact us via email: info@technoac.com or leave a message in "Contact us" section.