Cable locator Success CBI-309N
Digital cable locator featuring our most advanced receiver AP-019.1
Features:
- Monoblock receiver AP-019.1 with built-in omnidirectional antenna
- Direct digital measurement of cable current
- Direct digital depth measurement up to 10 m
- Indication of the deviation from the utility axis in the “ROUTE” mode
Overview
Brief description:
- Two modes of operation: "ROUTE” and "GRAPHIC”
- Three inbuilt sensors make omnidirectional antenna showing a cable direction on LCD display
- Inbuilt sensor for digital measurement of the depth and current
- Large LCD display with high resolution and adjustable backlight brightness
- Warranty: 1 year
Application:
- Detection of energized underground cables up to 10 m depth
- Direct digital measurement of the depth up to 10 m
- Direct measurement of the current
Specifications
Receiver AP-019.1 Specifications
Parameter Value Quasi-resonant frequencies of the filter 50(60) / 100(120) / 512 / 1024 / 8192 / 32768 Hz Quasiresonant filter quality factor (Q) Not less than 100 Frequency range "Broad band" 0,04 to 8 kHz Frequency range "Radio" 8 to 40 kHz The maximum gain of the electric path >100 dB Number of built-in sensors 4 Connected external sensors KI-110, HP-117, DODK-117, DKI-117 (made by «TECHNO-AC») Sensitivity control Auto - for 2D display «Route». Semi-automatic or manual (optional) - for the «Graphics». Automatic or manual (optional) - for the «2F» mode. Determination the burial depth of the route Automatically in the mode Route 0 to 9,99 m The accuracy of determining of the depth ±5% Measurement of the current of the signal received Automatically in the mode Route 0.001 to 9,99 A Accuracy of the measurement of the current of the signal received ±5% Support of energy saving (intermittent) modes of the route locating generators At combined work with the route locating generators made by "TECHNO-AC" ("Pulse" mode) Visual indication LCD display, 320x240 pix., LED lighting Induced parameters -parameters of setting and control
- 2D visualization of the route location relative to the device
- graphics of the signal level from sensors
- route burial depth
- signal current
Audio indication Built-in transmitter - synthesized sound HM- sound indication of buttons pressing Power supply source 4 to 7 V (4 elements of C type) Time of continuous work from the one complete of the alkaline batteries Not less than 20 hours Temperature range for storage / operation -30 to +60°С / -20 to +60°С House protection degree IP54 Dimensions 330x140x700 mm Weight 2,1 kg Standard set
Standard set:
- Receiver АP-019.1
- Battery alkaline R14 (4pcs.)
- Receiver case
- Operation manual
- Technical passport
- Set carrying bag
Accessories
Sensor DKI-117
DKI sensor is used with cable locating receiver for location of insulation damage in power cables, gas and heat pipes.
Sensor DODK-117
Searching of cable faults at shorting of its armoring to the ground. Searching of outer insulation defects of metal pipelines (water, gas) at trenchless laying.
Portable electromagnetic sensor MED-127
MED-127 is used for the selection of the cable from a bunch, for location of internal wiring and cable fault location.
Type C accumulators with charger
Set of type C rechargeable accumulators and chargers for AP-019 and AG-105.
Download
Download
Video
If you want to receive price quotation for Cable locator Success CBI-309N, Contact us via email: info@technoac.com or leave a message in "Contact us" section.