Cable locator “Success CBI-309G”
Digital cable locator featuring our newest receiver AP-019.3 with integrated GPS/GLONASS module.
Features:
- Monoblock receiver AP-019.3 with built-in GPS/GLONASS module
- Visual indication of the utility axis on large LCD screen
- direct digital depth measurement up to 10 m
- Location of non-conductive and non-metallic utilities with optional pushing rod and pipe sonde
Overview
Brief description:
- two modes of operation: "ROUTE” and "GRAPHIC”
- three inbuilt sensors make omnidirectional antenna showing a cable direction on large LCD display
- inbuilt sensor for digital measurement of the depth and current
- GPS/GLONASS module for accurate positioning of the located utility
- Mini-USB cable and desktop software for uploading and processing the data from the receiver.
Application:
- Detection of energized cables underground up to 10 m
- Indication of the deviation from the utility axis
- GPS/GLONASS positioning of the located route
- Location of non-conductive and non-metallic utilities with optional pushing rod and pipe sonde
Specifications
Receiver AP-019.3 Specifications
Parameter Value Quasi-resonant frequencies of the filter 50(60)/ 100(120)/ 512/ 1024/ 8192 / 32768 Hz Quasiresonant filter quality factor (Q) Not less than 100 Frequency range "Broad band" 0,04 to 8 kHz Frequency range "Radio" 8 to 40 kHz The maximum gain of the electric path >100 dB Number of built-in sensors 4 Connected external sensors CI-105, HP-117, DODK-117, DKI-117 (made by «TECHNO-AC») Sensitivity control Auto - for 2D display «Route». Semi-automatic or manual (optional) - for the «Graphics». Automatic or manual (optional) - for the «2F» mode. Determination the burial depth of the route Automatically in the mode Route 0 to 9,99 m The accuracy of determining of the depth ±5% Measurement of the current of the signal received Automatically in the mode Route 0.001 to 9,99 A Accuracy of the measurement of the current of the signal received ±5% Support of energy saving (intermittent) modes of the route locating generators At combined work with the route locating generators made by "TECHNO-AC" ("Pulse" mode) Visual indication LCD display, 320x240 pix., LED lighting Induced parameters - parameters of setting and control;
- 2D visualization of the route location relative to the device;
- graphics of the signal level from sensors;
- route burial depth;
- signal current.
Audio indication Built-in transmitter - synthesized sound HM- sound indication of buttons pressing Power supply source 4 to 7 V (4 elements of C type) Time of continuous work from the one complete of the alkaline batteries Not less than 20 hours Temperature range for storage / operation -30 to 60°С / -20 to 60°С House protection degree IP54 Dimensions 330x140x700 mm Weight 2,4 kg Standard set
- Receiver АP-019.3
- Battery alkaline R14 (4pcs.)
- Receiver bag
- CD with desktop software
- Mini-USB cable
- Operation manual
- Technical passport
Accessories
Sensor DKI-117 and Sensor DODK-117
Searching of cable faults at shorting of its armoring to the ground. Searching of outer insulation defects of metal pipelines (water, gas) at trenchless laying.
Pipe transmitter set MAG-05.X.XX
Pipe transmitter set MAG-05.X.XX
Sensor NR-117
Selection of the cable from a bunch.
Clamps CI-110
Identification of the cable, the function “selection the cable from a bunch”. Non-contact connection to the pipelines or to the cable.
Download
Operation manual
2.96 MB
Datasheet
2 MBVideo
Success CBI-309G (N) Route mode, passive cable location
AP-019.3 GPS/GLONASS operation
If you want to receive price quotation for Cable locator “Success CBI-309G”, Contact us via email: info@technoac.com or leave a message in "Contact us" section.