Cable and pipe locator "Athlete AG-318"

Cable and pipe locator "Athlete AG-318" the most powerful device with the transmitter 120 W!

Cable and pipe locator "Athlete AG - 318" is intended to determine location and laying depth of hidden buried utilities (power and signal cables, pipelines) at a depth of up to 25 m and at a distance of up to 5 km from the transmitter connection point as well as to locate the cable lines defective places.
Functions:

• Accurate (10-30 cm) localization of the pipe or cable path
• Accurate digital measurement of cable/pipe depth (up to 10meters)
• Tracing of loaded and dead cables
• Measurement of a current in discovered loaded cables
• Survey areas before ground-work beginning
• Pin point cable faults like: short circuit and cable breakage.

Product area:

• Energy
• Oil and gas
• Construction
• Housing services

The set composition: receiver AP-017, transmitter (generator) AG-120, network power supply unit ESP 240-13,5, cable of power supply unit, AG 120.02.060, cable of external accumulator AG 120.02.080, output cable AG 120.02.070, inductive antenna IEM-301.2, dowel grounding AG 110.02.030, clamps KI-110.

Technical parameters of automatic transmitter AG-120:

Frequencies f1, f2, f3 ("constant")	- selected by the user from 200 up to 10 000 Hz with 1Hz step and are recorded into nonvolatile memory.
Frequency f4 ("temporary")	- chosen instead of one of the constant frequencies, not recorded into nonvolatile memory, exists  while power is on.
Modes of generation	continuous, pulsed string, three frequencies
Allowed load resistance	0 ... ∞
Specified output current, A
- continuous and three frequencies modes	0,1 ... 10
- pulsed	0,1 ... 15
Maximum output voltage, V
- limited "by default" on the safe level	24
- Possible with internal power supply	220
- with external accumulator	330
- with  mains power supply	140
Maximum output power, not less than, W
- internal power supply	120 (continuous 1,2 ... 400 Ω) / 180 (pulse 0,8 ... 270 Ω)
- external accumulator	180 (continuous 1,8 ... 600 Ω) / 270 (pulse 1,2 ... 400 Ω)
Source of power supply
- integrated accumulator set	two sealed lead accumulators 12V/12A
- mains power supply  for working and for accumulator charging	output voltage 15 V, output  current 16 A max
- allowed external power supply	voltage 11 ... 27 V, current 15 A max
Maximum dimensions of the transmitter, mm	305C...270C...194
Maximum weight of the transmitter, kg	12
Temperatures	Minus  30 ... +45ºC
Environmental protection grade	IP54 (dust and water proof)

Technical parameters of receiver AP-017:

Passive operation frequencies, kHz	50/60,100,12-24
Active operation frequencies, kHz	512, 1024, 1450, 8928, 9820
Max measured depth, m	Up to 10
Max depth of detection, m	Up to 25
Max distance from the transmitter, km	Up to  5
The period of continuous work without lighting (LR 11 A/h)	Up to  50
Temperature, °C	-40 ... +60
Power supply	2 elements D-type
Dimensions, mm	720x110x150
Weight of device without cover, kg	1,700